API 15HR and API 15LR fiberglass pipe prices for oil well and geothermal well
|50sales+250+workers||including middle east, Euro,North and south america, Asia, Africa||Dongying,|
We are a leading manufacturer of technically advanced fiberglass pipe and tanks in china. Fiberglass pipe, commonly referred to as Fiberglass Reinforced Plastic (FRP) or Glass Reinforced Epoxy (GRE), is the material of choice for demanding oilfield applications.
Our Oilfield fiberglass line pipe is available in diameters of 2-inch to 12-inch (50 mm to 300 mm) and in pressure classes of 300 psig to 3000 psig (20 barg to 206 barg). Pipe sections are assembled using the specail joint. As the piping system weights about a quarter to one-eighth of the equivalent steel pipeline, it requires substantially smaller lifting equipment and a typical installation crew of three to six, depending on diameter.
High quality and efficiency, Science and technology leading, Top level service, Customer satisfaction.
We set the high standards of quality, safety and value in each processes such as R&D,purchase, manufacture, inspection. Following the requirements of ISO9001 and QPI QI, we have built a integrated and effective quality management system. We control the quality strictly with the scientific production process coved the whole processes from Supplier qualification review to raw material inspection, from surface material to material composition, from hardness to strength, from the real time monitoring in manufacturing process to the complete inspection before delivery. Our excellent quality management system can ensure the high-level and stable quality and guarantees the product qualification rate reach 100%.
We have all kinds of advanced testing and inspecting equipments covering the material testing, chemical detection,mechanics testing, nondestructive testing, fatigue test, and others testing customer required. With these advanced equipments, it is easier for product optimization, performence testing and quality control to ensure the stability and promotion of products.
|High quality and high efficiency||Professional|
|Management Guarantee||Equipment Guarantee|
Our main Product of API 15LR and API HR fiber glass pipes and Tanks
|API 15LR FRP pipeline||API 15HR FRP pipeline||API 15LR FRP pipeline||API 15HR FRP pipeline|
|FRP Steel Storage tanks||FRP steel storage tanks||FRP vertical storage tanks||FRP storage tanks|
Our GRE oil pipes and fittings had already certificated by API 15HR and API 15LR.
a. Diameter Range: 43.5mm – 1638mm (1″ – 40″)
b. Rated Pressure Range:3.45- 34.5MPa
c. Max. Operating Temperature: 110℃
It is glass fiber reinforced thermosetting resin pipeline manufactured by micro-controlled filament winding of expoxy resin and high- strength glass fiber roving.
Production standard: API 15HR-2001 /SY/T6267-2006 for high pressure fiberglass line pipe.
Range for Application:
1.Wastewater transmission or wastewater treatment pipeline;
2.High-pressure delivery line for petroleum, natural gas, saline water, CO2 and H2S 3.Connecting pipes for storage tanks and fire hoses.
Uses and Applications
• Crude oil transmission lines
• Gas transmission lines
• Oilfield re-injection lines
• Brine, saltwater and seawater lines
• Potable water transport lines
• Brackish water transport lines
• Wastewater and sewage systems
• Drainage lines
• General industrial service for mildly corrosive liquids
our fiberglass pipe laminate meets the requirement of API specification API 15LR and API 15HR. Pipe and fittings have a liner thickness of 0.25mm. Pipe with no liner is available upon request. The pipe wall thickness established in this catalogue is based on design temperature of 93°C. Contact for higher application temperatures.
Maximum operating Temperature: 93 °C
1.What is the difference between GRE and GRP pipes?
The main difference between the GRE and GRP is the resin used for bonding the glass fiber. GRP pipe used Isophthalic Resin whereas GRE pipe used Epoxy Resin. Pipes are used for industrial application, as it can withstand higher temperature compare to GRP pipe.
2. What is the difference between GRP and FRP?
Fibreglass or GRP is a composite material made out of glass fibres and uses polyester, vinyl, or epoxy as the polymer. … In a nutshell, if the fibre of composite is glass, it is known as GRP( Glass reinforced plastic). Fibreglass(GRP) is one type of FRP.
3.What is difference between GRP and FRP?
Polymer matrix holds the fibres in their position and transfers the loads between the fibres. … In a nutshell, if the fibre of composite is glass, it is known as GRP( Glass reinforced plastic). Fibreglass(GRP) is one type of FRP.
4.What is difference between API SPEC 15HR and API SPEC 15LR ?
API SPEC 15HR is standard for High-pressure Fiberglass Line Pipe. API SPEC 15LR standard for low-pressure Fiberglass Line Pipe.
We have both of them.
We are seeking fiberglass pipe and tanks distributors , agents, and representatives for our products in the world countries and areas and would welcome your interest. Below we will briefly describe who we are, what we do, what we are looking for, and how we prefer to operate.We are seeking Agents or Distributors in the worldwide for API 15HR and API 15LR fiberglass pipe and tanks.
1. Are you looking for a product distributor?
If your company is looking for a means to distribute your products in the EU, you will be able to find relevant commercial agents and exclusive distributors/sole distributors by looking through our directory. In addition, we provide a means for you to advertise your products to potential distributors. These services are provided free of charge. Sign up to find distributors Are you looking for new product lines to sell?
2.Are you a distributor looking for new product lines for your business to carry?
We have a catalogue of products that could be of relevance to your business and market. In addition you have the possibility to create a business profile targeting potential business partners. These services are provided free of charge.
3. Agents ‘s Advantages.
4. How to contact us
If you are interested in becoming our distributor, agents or representatives for API 15LR and API 15HR Fiberglass pipes and tanks, please contact us directly to discuss more details.